Why Use Silage Additives?

Benefits of Using Silage Additives

Increased milk yield – helps preserve valuable protein by reducing fermentation losses and spoilage.

  • Reduced concentrate feed requirements and increased forage intake – improved palatability due to better fermentation quality encourages higher forage consumption.

  • Improved rumen health – better-preserved forage supports higher forage intake and a more stable rumen environment.

  • Higher milk fat percentage – helps preserve the natural sugars in the grass, which contribute to milk fat production.


Source: Lise Austrheim, Norwegian Agricultural Advisory Service West (Norsk Landbruksrådgiving Vest)

Quantity and Application Rate of Silage Additives

Research consistently shows that livestock producers who produce large quantities of high-quality home-grown forage achieve the best economic results in milk and meat production from ruminants. High forage intake requires forage with a high nutritional value, including elevated energy and protein levels. Selecting the right harvest time is therefore essential.

However, harvesting grass early alone is not enough to ensure high forage intake. Fermentation quality must also be satisfactory, and the use of silage additives at the correct application rate, with good distribution throughout the crop, is crucial. Silage additives act as a valuable form of insurance by promoting faster pH reduction, reducing fermentation intensity, and lowering the risk of undesirable fermentation.

Silage Additives Are Divided Into Three Categories:

Acid-Based Additives, Salt-Based Additives, and Biological Additives

Acid-Based Additives

Acid-based silage additives inhibit fermentation by lowering the pH and stopping plant respiration. If the application rate is too low, the pH reduction may not be sufficient, allowing the growth of both acetic acid bacteria and butyric acid bacteria.

For this reason, acid-based additives should be applied according to the manufacturer's recommendations, typically 3-5 litres per tonne of grass. Low dry matter content, high-protein forage, and unfavourable weather conditions generally require higher application rates.

Acid-based additives break down plant cells and only affect the forage they come into direct contact with. Therefore, it is essential that the nozzles are positioned correctly to ensure complete coverage of the swath.

Salt-Based Additives

Salt-based additives, commonly known as Kofasil® or Xtrasil® products, inhibit fermentation in general and the growth of undesirable bacteria in particular.

In round bales and open bunker silos, nitrous gases develop and disperse throughout the forage mass. These gases help destroy undesirable bacteria and their spores. To achieve the desired effect, it is vital to apply the recommended dosage of 2.5-4 litres per tonne of grass for Kofasil/Xtrasil LP, using the lower dose only under optimal conditions and when the dry matter content exceeds 25%.

Biological Additives

Biological additives work by introducing additional beneficial lactic acid bacteria. This promotes faster production of lactic acid, resulting in a more rapid reduction in pH.

The recommended dosage is 1 gram of bacterial culture per tonne of grass. When using a precision chop forage harvester, an application volume of 2 litres per tonne is generally recommended. For round baling, however, the volume should be increased to 4 litres per tonne of grass to ensure adequate distribution and mixing.

Additional Considerations for Application Rates

Grass types

Ryegrass is a leafy forage species that can be difficult to wilt effectively. Crops containing a high proportion of ryegrass with low dry matter content generally require application rates at the upper end of the recommended range.

Clover and cocksfoot grass have a high buffering capacity, meaning they resist changes in pH and therefore require higher additive application rates.

Fertilisation

Heavy nitrogen fertilisation increases the crop's buffering capacity and consequently requires a higher application rate of silage additive.

Early Harvesting

Early-cut grass typically has a high nitrogen content and relatively low dry matter content. Under these conditions, the application rate should be increased. The dosage may be reduced when the crop has been adequately wilted before ensiling.

Harvesting Conditions

When grass is harvested directly without wilting, when harvesting operations take a long time, or when conditions are particularly wet, higher application rates are recommended.

If there is any suspicion of soil contamination in the crop, the dosage should also be increased to help suppress undesirable microbial activity and maintain forage quality.


Source: Jan Håvard Kingsrød, Product Manager, Silage Preservation, FK Agri – www.buskap.no

Silage Additives Help Preserve Feed Value

Norway's natural conditions provide excellent opportunities for producing large quantities of high-quality forage. The challenge, however, is preserving the valuable nutrients in the grass all the way from harvest to the feed bunk.

In recent years, water availability has rarely been the limiting factor for forage yields. However, these conditions have also resulted in more challenging wilting conditions and lower dry matter (DM) content in silage. A higher dry matter percentage naturally limits fermentation and helps preserve feed value. In practice, however, achieving sufficiently high dry matter levels within a short period, ideally less than 24 hours, can be difficult.

The use of silage additives can significantly reduce fermentation in much the same way. Effective silage additives help preserve more of the sugars and proteins present in the forage, even at lower dry matter levels. As a result, forage can make up a larger proportion of the total feed ration, reducing the need for supplementary concentrates.

Correct Application

To achieve the desired effect, it is essential that silage additives are applied at the correct location on the harvesting machine. Incorrect placement can lead to significant drift and evaporation losses, meaning less additive reaches the crop and the expected preservation effect is reduced.

Severe underdosing can, in the worst-case scenario, have a more negative impact than applying no additive at all. For acid-based additives, this threshold has been estimated to be below approximately half the manufacturer's recommended application rate. At such low dosage levels, the additive may fail to sufficiently control fermentation, increasing the risk of undesirable spoilage and nutrient losses.

Proper dosing and even distribution throughout the forage are therefore crucial for achieving optimal silage quality and maximizing the return on investment in silage additives.